Parts

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

True competitors are always looking for a performance advantage—a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets deliver simplicity, compatibility, and durability. - DUB technology delivers the lightest, stiffest, and strongest crankset available - SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - The X-SYNC 2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability - New colorway is matched to work with XX1 Eagle AXS-enabled componentry

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity, and advanced chain management mean this derailleur does exactly what you want when you need it. NOTE: Does not include eTap battery or charger. Compatible with existing eTap batteries. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

KS Dropper Post Service Parts

Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing

The Shimano SLX CS-M7100 12-speed cassette is optimized with rider-tuned gear combinations for MTB excellence. - Advanced shifting performance provides the confidence to enjoy any trail - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - HYPERGLIDE+ technology provides better chain engagement, stronger retention, and smoother pedaling with greater power and confidence over rapidly changing terrain - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - The CS-M7100 cassette meets durability requirements for E-MTB applications - Cassette Body Type: Shimano Micro Spline - Drivetrain Speeds: 12 - Range: 10-45 - Designed for ebike: Yes - Color: Silver/Black - Defined Color: Silver

The M7100 chain provides enhanced chain retention thanks to an extended portion of the inner plate. The new chain features quick-link assembly and SIL-TEC treatment for extended offroad durability. - Extended inner plate improves chain engagement and retention - Reduced shift times and pedaling shock - Non-reusable - Features Shimano's SIL-TEC ultra-low friction surface treatment - Includes Shimano Quick-Link (SM-CN910-12) - This chain meets durability requirements for E-MTB applications

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

These are our custom styled stem caps- available in a large array of colors to match your bike's color scheme.

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Adhesive backed, 100% cotton, braided, reinforced edges

Service and replacement parts specifically for Trek Knock Block technology. Genuine replacement parts Get your bike back on the trail with the headset parts you need. - Trek proprietary headset components compatible with Trek Knock Block models - 72-degree headset fits 2021 Slash 29 - Includes crown race, bearings, top cover, frame chip & fastener - Frame chip has display tabs to connect Bosch Kiox Mount sold separately - Must be paired with Knock Block stem and Knock Block spacers - Knock Block headset spacers not included

Genuine replacement parts Get back on the road with a genuine replacement fork The fork you need. - Original equipment replacement forks for Trek Super Commuter+ eBikes - Color matched for direct compatibility - Uses 100x15mm thru axle (not included) - 307mm Steerer Length - 45mm Rake

Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride. Key features - Dual-density compound design provides secure grip, control, and comfort - Contoured design comfortably supports palm to decrease fatigue - Lock-on clamp securely holds grip core to bar, eliminating slipping

The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers

Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation

The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 175g - Weight (pair + cleats): 400g - Float angle: 6° - Release angle: 13°

- Thick-thin tooth design for maximum chain engagement - Heat-treated forged steel - BCD: 82mm - Optimized for 11-12 speed system - Compatible with Gamma Pro and Alpha Drive 1x crankset

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

A lock-on grip with a unique finned texture for added comfort and control. Get a grip on sustainability The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Nylon CoreLock clamp offers dual clamp strength - 3mm M4 bolt increases hold and resists stripping - 31mm diameter

Get back on the road with a genuine replacement stem. Original equipment replacement stem for your Madone SLR. PRODUCT DETAILS - High fit stem is 7-degrees of drop - Not compatible with other bikes - For installation instructions, please see your Madone Assembly Manual

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Aerodynamic design. - Color matched for direct compatibility - 7mm round and 10mm oval saddle rail clamp ears sold separately

For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Proven time after time to be a reliable, easily adjustable system that continues to outperform the competition, the 4-Axis stem is a surefire go-to for an entry level stem that has world-class performance. - Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: 30 degrees - S.H.I.S. Stem Clamp Diameter: 28.6

- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener

The Box Two chain's nickel plating adds both corrosion and wear resistance. All Prime 9 chains have chamfered shifting edges, solid plates, and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. We chose to modernize the 9-speed platform due to the chain's spirited reputation. FEATURES - Prime 9 Technology - Our Most Durable Chain - Wide/Narrow Chainring Compatible - Durable Hardened Solid Pins - Includes Nickel Connecting Link - Nickel Plated Protection - Extra Long for Long Wheel Base & Cargo Bikes IMPORTANT NOTES - Available in 2 lengths: 126L & 144L - Compatible with BMX 3/32" Chainrings and Cogs - Compatible with most 10,11, & 12-speed wide/narrow chainrings. COMPATIBILITY - Box One Prime 9 11-50T and also 12-50T eBike Cassette Black - Box Two Prime 9 11-50T and also 12-50T eBike Cassette Black - Box Three Prime 9 11-50T and also 12-50T eBike Cassette Black - Box One Prime 9 Rear Derailleur - Box Two Prime 9 X-Wide Rear Derailleur Black - Box Three Prime 9 X-Wide Rear Derailleur Black - Box One Prime 9 Shifter Black - Box Two Prime 9 Shifter Black - Box Three Prime 9 Shifter Black - Box Two Chainring - Box One Single Speed Aluminum Cogs - Box One Single Speed Chromoly Cogs - Box Two Freewheel - Perfect for your 3/32" BMX Chainring