Filter By:
Bottom Brackets
$50.00
- Extra-thick walled hollow CrMo spindle with Ti-Nitride coating
- Industrial cartridge bearings. 12mm steel crank bolts included
- Forged aluminum cups with lip on drive side.
- 280g
$72.99 - $94.99
- Replaces standard BB90/95 press-in bearings commonly found on Trek bicycles with a solid, unified thread-together bottom bracket interface
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life
- OS versions are designed for use in frames with worn-out, oversized bottom bracket shells
- Low-friction dual seals protect the bearings from harmful contaminants
- Sealed premium bearings are serviceable
- Models available for both Shimano HTII 24mm and SRAM GXP 22/24mm spindles
- Requires a special tool for installation (P/N# 610756)
$15.99 - $20.71
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$47.99
Genuine replacement parts
Revive your ride with a fresh set of bearings for your BB90/95 equipped carbon bike.
Proprietary replacement bottom bracket for the Trek family of bikes.
- Only compatible with 24mm cranks
- Not compatible with BB30 cranks
$52.99
Genuine replacement parts
Praxis bottom brackets feature precise tolerances and quality materials to ensure smooth, quiet spinning for many miles.
No more creaking. Smooth operation. Fast bearing replacement.
- For use with Trek T47 frames with 85.5mm bottom bracket shells
- Only compatible with Praxis M30 cranks
$123.99
T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle.
T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells.
Bottom Bracket Includes:
- BB Cups with bearings
- 2x Silicone dust seals
- 2x 0.5mm crank spindle spacers
- 2x 1.0mm crank spindle spacers
Specifications:
- Bearings: Enduro ABEC-3
- Bottom Bracket/Frame Interface: T47
- Bottom Bracket Shell Width (mm): 68mm - 132mm
- Bottom Bracket Shell I.D.: 47x1.0mm Threaded
- Crank Spindle Diameter: 24.00mm
- Over Bearing Width: 91.5mm in 86.5mm wide shell
- Over Bearing Width Dimensions include supplied silicone dust shields
- Tool Pattern: 48.5mm x 16-notch
- Weight: 119g
$145.99
Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable.
Bottom Bracket Includes:
- BB Cups with bearings
- 2 x Silicone dust seals
- 2 x 0.5mm crank spindle spacers
- 2 x 1.0mm crank spindle spacers
- 1 x 2.5mm crank spindle spacer
- Bearings: Enduro 6806/29 ABEC-3
- Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI)
- Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m
- Bottom Bracket Shell I.D.: 33.6-33.9 mm
- Crank Spindle Diameter: 29mm
- Tool Pattern: 48.5mm x 16-notch
- Over Bearing Width: 91.5mm in a 68mm wide shell
- Weight: 102g
Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle:
- ISO/English or BSA Threaded (1.37 in x 24 TPI)
- 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)
Page 1 of 1