Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$1.65 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.88
- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts
$2.99
Bar end plugs (2)
$3.99
Genuine replacement parts Keeps your bike looking like new. Protects your bike from the elements. - Used in place of Range Extender system - Black frame plug
$4.55 - $11.80 $8.99 - $11.80 Up to 49% Off
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$4.71
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.71
These are the correct connecting links for SRAM's 11-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$4.99
For use with ICS stem. - Keeps a clean aesthetic - Please consult assembly manual before attempting service
$5.49 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.65
These are the correct connecting links for SRAM's PowerLink 9-speed chains. They are great for installing new chains and fixing chains on the road and trail, too.
$5.65
These are the correct connecting links for SRAM's PowerLink 8-speed chains. They are great for installing new chains and fixing chains on the road and trail, too.
$5.65
These are the correct connecting links for SRAM's 10-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in packs of four.
$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$6.59
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains
$6.95 - $69.50
- Adhesive backed, 100% cotton, braided, reinforced edges
$6.99
Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs
$7.49
Notched binder bolts for frames with integrated seat collars. Details: CroMoly steel bolts Three lengths available: 16, 19 and 21mm 8mm diameter
$7.53
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains
$7.53
Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors. - For use with T-Type chains - No tools required for installation
$7.99 - $8.50
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes without shifters - Set of two grips Specifications - Length: 107mm - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have. Product details - Designed for use on kids' bikes with twist shifters - Set of two grips Specifications - Diameter: 22.2mm - End Type: Closed - Lock-on: No - Material: Kraton Rubber
$8.47
These are our custom styled stem caps- available in a large array of colors to match your bike's color scheme.
$8.47
MSW Seatpost Clamps keep your saddle and seatpost from moving around while you’re out riding. Tough and dependable, they’re available in polished silver or black finishes, as well as four common sizes. - MSW Seatpost Clamp - 34.9mm, Black
$9.00 - $16.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
$9.41
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
$9.41
• Soft foam • w/End plugs • 125mm
$9.99
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look
$9.99
Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.
$9.99
Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Replacement downtube strike plate for 2012 Madone - Self adhesive
$9.99
Genuine replacement parts Integrates seamlessly into the frame. Neutral matte black option only, paint match charge port covers may be available for select models, refer to spec sheet in Bike tech section of your bike SKU. Protects the charge port from the elements. - Durable plastic construction - Includes hardware - Not compatible with Bosch Smart System
$10.35
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.
$10.35
Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition. The 90mm width of these grips accommodate twist shifters.
$12.00 $15.00 20% Off
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$12.99 - $14.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames. - Features threaded eyelets for rear rack mounting solutions on unique bike frames - Quick release (QR) versions include rubber lever grip
$12.99
- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams
$13.00
Z6 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape - Links (links): 116 - Width: 7.3 mm - Drivetrain Speeds: 6 , 7 - Chain Connection Type: Reusable Master Link
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
$14.95
- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener
$14.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
$14.99 - $18.82
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g
$14.99
For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team
$14.99
Genuine replacement parts Get back on the bike with fresh brake pads for optimal operation and safety. Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes. - Replacement disc brake pads for Zoom HL-280 calipers - HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models
$15.00 - $18.82
- Thick-thin tooth design for maximum chain engagement - Heat-treated forged steel - BCD: 82mm - Optimized for 11-12 speed system - Compatible with Gamma Pro and Alpha Drive 1x crankset
$15.06
Add some classic style to your favorite rig with Electra's Hand-Stitched Grips. You'll love their stylish hand stitching and long-lasting comfort.
$15.06
KS Dropper Post Service Parts
$15.06
- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable
$15.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately
$15.99 - $20.71
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$15.99
Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t
$16.00 - $20.00
Benno replacement derailleur hangers. - Benno Derailleur Hanger: eJoy, eScout, 2017-21, Silver
$16.00
Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar
$16.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.
$16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
$16.99 - $54.99
Dimension Chainrings. - No ramps, pins, or shift aids
$16.99 - $19.90
- High performance compounds recommended for all-conditions - Steel backing
$17.00
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$17.99
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing
Page 1 of 6 Next page