Tools/Maintenance

Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5. NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

The TWB-36 is a crow foot style wrench used with any 3/8-inch drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct specification. Constructed from heat-treated 4130 laser-cut steel and plated for long life.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Wheels Mfg™ Thread Together & FSA® MegaEvo®. Manufactured in-house by Park Tool, anodized for easy identification, and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 48–50 mm and a minor diameter of 46.4 mm, including: - FSA® MegaEvo® - Wheels Mfg™ Thread Together Note: Does not fit Hope™ BSA30

This ultra-high-performance grease is ideal for use on bicycles. The low-friction formula resists water and contaminants without standing out on the bike Product details - Performance waterproof grease for bicycle bearings, seals, assembly, and more - The formula reduces friction while performing longer between service intervals - Superior water washout resistance stands up to power washing - Unscented and undyed - As with all grease, clean and remove old grease first to guarantee compatibility - Compatible with Loctite Threadlocker and all metals, plastics, and carbon fiber - Available in a wide range of sizes and dispensing methods - 3oz (85g) cartridge is most compatible with the Bontrager Grease Gun

Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors. - Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems - For lockrings with 54mm outside diameter and 16 notches - Replacement for Shimano TL-FC39 tool - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

We worked diligently on our next generation of bicycle chain lubricant for several years. Our Micro Resistant Complex Compounds (MRCC) had been in development for over 10 years. Originally developed for our motorsports lubrication, MRCC technology creates a lighter viscosity while maintaining high protection, reducing friction, and increase in creating much higher film strength than common, traditional technology. PRO X LITE Bicycle Chain Lubricant Like our Regular chain lube, cyclists who tested or raced using PRO X Lite, report it to perform better then any other lube they have ever used. Even those riders that use our Standard Lite and Original chain lubes. A bold statement even for us to claim, but comes from years of technology, formulation, and testing. PRO X Lite brings the aspect of polymerization and MRCC oils that by design migrate for complete wetting of the surfaces. Benefits: - MRCC technology creates an extremely low friction bond. - A dry lubricant that does not attract dust and dirt. - Watts. Very little is used to move your bike parts. - 10 time high lubricity the Teflon. Ceramic lubes? Catchy hype. - Waterproof which will not wash off. - Drive train stays clean, last longer, runs silent. - Extremely durable, outlasts all other chain lubes in any condition. - Tamely scented. - Applied sparingly for the best results and increased value. - Can be shipped around the world via air freight and ground. PRO X LITE is the lighter version to our PRO X REGULAR chain lubricant. PRO X LITE is ideal for a road bike, wet or dry, and extreme dry off-road trail conditions or over cyclist you are prone to over applying. PRO X LITE can be used on all cables, pivots points and seals. Safe on plastic, rubber, and all seal materials. The product is designed to not harm your components. Our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, your drive train lasts longer. Very good performer in extreme cold conditions.

Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

- Don't get stranded. Pack of tire plugs for use with Tubeless Kit or Classic Tubeless Kit - Also available in a pack of 20

Tools designed for use on your bike When it's time to refresh your trusty bike, Trek Genuine Replacement Parts and tools have you covered. Product details - Rotary tool attachment for removing nutserts from frames - Refer to manual for complete instructions for use

Our Classic Freehub Oil is a great addition for the bicycle market and another superior product from Dumonde Tech. Freehub Oil is the original lubricant on the market specifically designed for Pawl style freehubs which require a lightweight lubricant. Freehub Oil performs consistently throughout a wide temperature range. "Flow Point" is -40 degrees, is extremely low friction, providing the greatest protection. Simply follow the manufacturer's specification for the volume of oil required in your freehub body to experience the superior performance of Dumonde Tech's Freehub Oil. With Freehub Oil being lightweight, growing reports for other applications have been reported. It can be used as cable lube and brake lever lubricant for the small moving parts and the lightweight spring action they have. Time and cold temperatures do not affect the performance of Freehub Oil like with heavier viscosity, time and temperature aged greases. They become thicker and stickier as they age slowing down the parts action.

Pro X Bio-Bike Cleaner ready-to-use spray is another of our performance-based products like our bicycle lubricants. 100% Bio-Degradable. Non-toxic. Water Soluble. Eco Kind. Low Scent. Our selective surfactants were designed to wet the surfaces to reduce surface tension to aid in cleaning a bicycle of dirt, sweat, organic compounds and hydrocarbons. Safe on all parts of pedal-driven vehicles. Rinses Clean. Leaves no residue. No water spots. Designed to break down and flush away: - Dirt and road grime - Sweat - Natural organic compounds - Hydrocarbons - Bugs - Abrasions No need to "use generously" like most other brands. Like our chain lubes, user does not need to over apply or use generously for it to perform. Spray on and let it do it's work.

Disposable gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. Made from a thick, heavy-duty nitrile material, our gloves provide superior fit and are tough enough to withstand a day's work. An essential companion for brake bleeding, drivetrain cleaning, and other messy procedures.

• Powder-free and latex-free
• Ambidextrous
• Box of 100 gloves
• Available in sizes S, M, L, and XL

The Classic MR GREASE with our "Micro Resistance Polymer" technology provides the ultimate protection and performance for bearings and suspension forks. MR Grease polymerizes to the surfaces leaving a barrier of grease that reduces wear, provided corrosion protection, and is waterproof. MR Grease is carbon fiber safe. Our Classic Liquid Grease can be used to thin MR Grease to create a lighter weight viscosity if desired.

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

Our Classic ORIGINAL chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. - “Riding in” forms an extremely low-friction plating. - Plating bonds to chain; can’t be washed off! - Components stay cleaner, last longer, and run quieter. - Extremely durable, outlasts all other chain lubes! - Environmentally sensitive and saves money. - To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Original BCL is more concentrated for exceptional durability under the most challenging conditions. The two formulas are compatible and may be used interchangeably. We recommend the Original Bicycle Chain Lube for mountain bikes, cyclo-cross, and more extreme conditions. You can confidently use Dumonde Tech’s Bicycle Chain Lube on all cables, pivots points, and seals. Safe on plastic, rubber, all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal “carbon footprint” by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in the extreme cold conditions..

Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.

- Versatile digital scales built to accurately weigh bikes, frames and components - DS-1 hanging scale designed to be clamped into a repair stand or hung from the silicone coated hook - DS-1 measures in pounds and kilograms to the tenth position up to 25kg (55lb) - DS-2 tabletop scale is perfect for weighing small parts and components and includes a tare function to exclude weight of container - DS-2 easily switches between grams and ounces and has a 3000g (106oz) capacity

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-4 utilizes a 36mm box-end head and a pin spanner for your bottom bracket removal and installation needs.

Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.

Shorten your steerer, trim your handlebars and always make sure to measure twice with Park's Hack Saw. It features an outstandingly rigid aluminum die-cast frame with a blade tension adjuster and a superbly comfortable handle. The SAW-1 comes with one blade and accepts all 12-inch (300mm) replacement blades.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA when used in the TS-8, TS-25, TS-15, TS-7 or TS-5 will work with all rear thru axle hubs. For thru axle hubs greater than 135 (142, 150, 157, etc.) in the TS-2.2, use the TS-2TA Thru Axle Adaptors (sold separately).

Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

Truing stand upright extensions install in seconds on any TS-2 or TS-2.2 Truing Stand, allowing the stand to be used on wheels with hubs up to 200mm wide (tandem, fat and downhill bikes), as well as on wheels with a 29-inch mountain bike tire installed*. In addition, specially sized bosses serve as adaptors so the stand can be used with wheels using thru-axle hubs with removable axles. Same features as the the TS-2EXT.2 with the addition of slots to secure rear drive e-bike wheels. * Note: TS-2.2 Truing Stand does not require these adaptors to accommodate 29-inch wheels but does require it to fit hub widths from 180mm to 200+mm.