Accessories

Built on the cutting-edge Speedplay Pedal System, Power Zero single-sided power pedals deliver reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance by providing the visibility, adjustability and efficiencies needed to break through to the next level. Pair with the Wahoo ecosystem of smart devices for a more full picture of your data and performance, and to track, analyze, share and improve. - Single-sided power metrics measure cadence from the left pedal; power is tracked and doubled to estimate total power output no matter where you are crushing watts, with lab tested +/- 1% power accuracy - Simple and intuitive Wahoo Fitness app offers guided instructions on how to install Power Zero's on any bike, calibrate the pedals for accuracy, and perform firmware updates - Simultaneously connect to three Bluetooth devices while broadcasting to an unlimited number of ANT+ devices Power Zero is built on on the dual-sided entry Speedplay Pedal System, which maximizes power transfer by putting your foot closer to the spindle. No more fumbling, fussing or kicking your pedal over; leverage a powerful take off when the light turns green and clip in with ease - Power Zero and the Speedplay Standard Tension Cleat create a secure connection and a streamlined profile. The two form a seamless integration that aids power transfer and increases aerodynamics. The slim profile cleat and rubber texture create enhanced stability when walking in your road shoes off the bike - The cleat can be positioned on the bottom of the shoe and adjusted fore-aft, left-right and rotationally, allowing between 0-15 degrees of float, allowing the heel to pivot around the center of the pedal. This range of motion in the foot, lower leg and knee increases comfort and enhances pedal efficiency - Uncompromised durability and minimal maintenance thanks to their stainless steel construction and triple-sealed bearing system Powered by a rechargeable lithium battery, Power Zero power pedals have a battery life with up to 75 hours, tested and proven to provide accurate power data across changing temperatures that you are sure to encounter while riding - Pair with the rest of the Wahoo Ecosystem compatible devices for the most connected training experience

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

For cyclists of all levels who are value-conscious but unwilling to compromise on quality, the KICKR CORE 2 provides a class-leading training experience. The KICKR CORE 2 is a powerhouse in its own right, offering many of the same premium features as other flagship trainers on the market. It delivers the same accurate power measurement, robust build quality, and realistic ride feel that define the KICKR family, making it an outstanding choice that punches well above its weight. - New leg design makes setup faster and easier, and more stable - Ultimate connectivity with WIFI and Bluetooth sensor hub

Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.

Ride Farther Hammer out big days with Range Extender. This compact back-up battery adds 160Wh of power to extend your range by up to 44%. It fits neatly in a standard water bottle cage in the inner triangle, where there's a short reach to the charge port, and secures in place with its included strap — no additional hardware required. Product details - 160 Wh battery - Charge port enables charging both bike and range extender simultaneously - LED battery level indicator - Includes Range Extender user manual - Ships to retailer. Not returnable. - Retention strap and charge cable are required and sold separately

The Edge® 550 cycling computer features a vivid color display, button controls and advanced features to guide your training and provide insights into your performance. Get smart fueling alerts that account for fitness, course demands, heat and humidity when using the power guide feature or following a workout with your compatible power meter and heart rate monitor. Ride like a local with preloaded maps for road, gravel and trails. Get alerts for road hazards reported by fellow cyclists — right on your Edge — when used with your compatible smartphone and the Garmin Connect™ app. Train like a pro with a variety of plans that integrate seamlessly with your device. Garmin Cycling Coach plans even adapt to your performance, recovery and more when riding with your compatible power meter and heart rate monitor. Edge 550 has a sleek, compact design and delivers up to 36 hours in battery saver mode. • GPS cycling computer with vivid color display and button operations combines superior navigation, planning and performance tracking, cycling awareness, and smart connectivity • Battery life: In demanding use cases, get up to 12 hours, or get up to 36 hours in battery saver mode • Get smart fueling alerts that prompt you in-ride to hydrate and refuel based on your current fitness, course demands, heat and humidity when using the power guide feature or following a workout with your compatible power meter and heart rate monitor • Ride like a local with preloaded maps for road, gravel and trails, including Trailforks maps with Forksight mode to see detailed information about what’s ahead • Multi-band GPS with automatic 5 Hz GPS recording for superior accuracy and position tracking while descending in enduro or downhill ride profiles • Monitor the weather and make more informed decisions in-ride with radar and wind direction overlays when used with your compatible smartphone and the Garmin Connect™ app • Get alerts for road hazards reported by fellow cyclists, and contribute your own edits when used with your compatible smartphone and the Garmin Connect™ app • When used with your compatible smartphone and the Garmin Connect™ app, stay connected on group rides with in-ride messaging, live locations and incident detection alerts; plus, add fun and competition with in-ride leaderboards for climbs, real-time data comparisons and postride awards • On solo rides, LiveTrack™ location sharing lets loved ones follow along, and incident detection can send a message with your location to your emergency contacts if your device senses that an incident occurred (when used with your compatible smartphone and the Garmin Connect™ app) • Train for an event, achieve a milestone, or improve your fitness with Garmin Coach training plans for cyclists; Garmin Cycling Coach plans even adapts to your current training load, recovery and course demands when riding with your compatible power meter and heart rate monitor • See remaining ascent and grade when climbing on every ride, so you can gauge your effort with the ClimbPro ascent planner • Manage your efforts with the power guide feature, which recommends power targets throughout a course, when paired with your power meter • See how long you spent in each chain ring in the postride gear ratio analysis, when connected to electronic shifting • Get stamina insights while you ride, so you can keep an eye on how much longer you can really push it, when paired with your power meter and heart rate monitor

The Feedback Sports Pro Mechanic HD Bike Repair Stand is constructed with oversized, anodized aluminum tubes, a wide and stable base, stronger jaws, and faster closure. It features a working load range of 10-70lbs (max load 100lbs/45kg) and tube diameters to 2.6 inches (6.6 cm). Yet it’s lightweight and portable at 18 pounds (8 kg) and 8” x 43” (21 cm x 115 cm) when folded for travel. - Oversized, anodized 6061 T6 aluminum construction is ultralight, corrosion-resistant and incredibly durable - Oversized knob to fix the position of a 360-degree rotating clamp, providing easy access to all parts of your bicycle - Strong clutch design holds bike at any angle for repairs: 45% greater grip than Pro Elite - New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro Elite - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes - 3-year warranty.

With a 70-pound carrying capacity and coil-spring suspension, the Coho XC® is our all-terrain bike trailer for singletrack bikepacking adventures.

For a seamless solution to biking and strolling on the go, the Honey Bee easily converts from a lightweight, two-seat bike trailer to a convenient walking stroller.

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims

The Hammerhead Karoo cycling computer represents innovation, design, and performance. The stunning screen, premium materials, and all-day battery life combine to make Karoo a cycling computer without compromise. Easy to use in every condition thanks to thoughtful hardware and software design, Karoo allows you to focus on the road - and the ride - instead of your equipment. Featuring comprehensive structured workout support, industry best navigation, and a Companion App and Dashboard that let you manage your Karoo without removing it from the handlebars; Karoo helps you hit your training goals, explore new routes, and enjoy every ride. The pièce de resistance is Karoo’s unparalleled control of your bike’s connected components, from SRAM AXS products to E-Bikes to ANT+ lights - Includes Device, 31.8mm Hammerhead Mounting System, USB-C to USB-C Charging Cable, Quarter-Turn Adapter, Lanyard, Quick Start Guide - Features a smartphone-like screen with industry-leading display for colorful visualizations and intuitive configurations of your ride data and maps - Control Karoo your way — no matter the conditions — with a responsive touch screen and easy-to-use hardware buttons Spend less time waiting and more time riding thanks to 64GB of memory, 4GB of RAM, and extended battery life providing more maps, faster map rendering, and longer uptime - Multi-band GNSS technology gives pin-point accuracy on any path, whether in crowded cities, tight singletrack, tree covered trails, or anywhere in between - Choose your preferred surface-specific routing type (road, MTB, gravel) and explore new paths with our best-in-class maps and navigation, including free global maps, instant route syncing from connected accounts, and automatic climb detection with or without a route - Connectivity with SRAM AXS products allows for easier customization, better equipment awareness, and simple pairing with your groupsets, power meters, tire pressure sensors, and more. Karoo’s best-in-class support for ANT+ radars and lights make it easier than ever to be safe on the road in any riding condition - Easily pair Karoo to your E-Bike and access LEV E-Bike data fields such as motor assist level, estimated range, E-Bike motor output, and E-Bike battery level - Regular software updates introduce new features and improvements to Karoo, keeping it at the forefront of the cycling ecosystem to make every ride better than the last

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

Powerful, robust and adventure ready, the all-new ELEMNT ROAM combines a large, anti-glare display with touchscreen convenience and dynamic ride intelligence to make every ride effortless. With crisp, easy-to-read mapping, intuitive navigation, and smart features that handle the details before, during, and after your ride, the ELEMNT ROAM keeps you focused on the road ahead. Whether you're exploring new routes or pushing through an endurance challenge, the ELEMNT ROAM is always ready for your next big ride.

Carry your children or groceries and use the original box. Genuine replacement Cargo Box for your Fetch. PRODUCT DETAILS - Mounting hardware to be ordered separately - Refer to the Service Manual for assembly & service instructions

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 Solar touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Ride longer with solar charging, and get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

THE BIKE COMPUTER MADE FOR MOUNTAIN BIKERS Edge MTB is made tough with a rugged, compact design that’s ready for long days on the trails. And new enduro and downhill ride profiles with 5 Hz GPS recording during descents mean you can see greater detail about the lines you take. - Rugged Design With Scratch-Resistant Corning® Gorilla® Glass - Up To 14 Hours Of Battery Life In Demanding Use Cases - Enduro And Downhill Ride Profiles - 5 Hz GPS Recording While Descending In Enduro Or Downhill Ride Profiles - Preloaded With Trailforks Maps And Forksight Mode - Automatically Track Split Times While Riding BUILT TO SHRED Featuring a compact, rugged 7-button design with scratch-resistant Corning Gorilla Glass, the Edge MTB bike computer can stand up to the most extreme rides. ENDURO AND DOWNHILL RIDE PROFILES The enduro ride profile tracks total ascent and descent from each run and for the ride overall. The downhill profile laps each time you finish a descent, so your return to the top via shuttle or ski lift doesn’t affect your ride stats. 5 HZ GPS RECORDING See greater detail about the lines you take down the trail with multi-band GPS with 5 Hz GPS recording while using the enduro or downhill ride profiles. UNLOCK NEW TRAIL DATA With preloaded Trailforks maps, you can dig into trail details before you ride. And get guidance along the way with Forksight mode to see the names of trails up ahead, distance, elevation, and more. SET TIMING GATES Set timing gates throughout a course to track split times and better understand your ride or race performance in real time. RIP ALL DAY LONG Edge MTB is built with long riding days in mind, with up to 14 hours of battery life in demanding use cases or up to 26 hours in battery saver mode.

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

Now your favorite four-legged friend can come along for the ride. The Burley Tail Wagon® pet bike trailer is thoughtfully designed for easy loading and unloading, quick cleaning, and maximum comfort for your canine copilot. Made with Post-Consumer Recycled Fabrics and BlueSign Certified, Sustainable Materials. What's in the Box: - Trailer - User's Manual - 2 Wheels - 2 Wheel Guards - Safety Flag - Tow Bar with Steel Hitch - Capacity (lb/kg) 75 / 34 - Weight (lb/kg) 21 / 9.5 - Interior Height (in/cm) 21.1 / 53.5 - Interior Width (in/cm) 17.3 / 44 - Interior Length (in/cm) 32.5 / 82.5 - Wheel Size (in/cm) 16 / 41 - Handlebar Height (in/cm) N/A - Size Open L x W x H (in) 33.5 x 27.8 x 31.5 - Size Open L x W x H (cm) 85 x 70.5 x 80 - Size Folded L x W x H (in) 35.5 x 25.8 x 11 - Size Folded L x W x H (cm) 90 x 65.4 x 28 - Opening Height (in/cm) 21.1 / 53.5 - Opening Width (in/cm) 16.5 / 42 - Trailer Step Up 9" (Entry into the trailer) - Trailer Drop 6.5" (Bottom of the trailer to the ground) - Max Pet Height (in/cm) 23 / 58.4 - Max Pet Weight (lb/kg) 75 / 34 - Max Pet Length (in/cm) 29 / 73.7

Representing the next evolution of our flagship repair stand, the new Pro Mechanic builds on the longstanding reputation of its predecessor, the Pro Elite. With upgraded clamp jaws, clutch components, and mast hardware, the Pro Mechanic is more durable, more stable, easier to use, and even more reliable. The updated front spinner knob on our patented Speed Ratchet clamp head makes operation even faster, and the revised rotating clutch internals hold bikes more securely. This is the premier bike repair stand for mechanics who value class-leading lightweight, compact folded size, and rugged durability combined with unmatched stability, adjustability, and portability. Features: - Patented, ratcheting action seatpost clamp features a spinner knob for fast, one-handed operation and a push-button release. - Updated with more holding force, the 360-degree rotating clamp design provides easy access to any part of your bicycle. - Frame clamp positions from 42"-67" (107-170cm) in height. - Secure clamp with micro-adjustment secures and protects expensive components and beautifully painted frames. - New, rubber clamp jaw covers are tool-free and replaceable. - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes. - Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant, and incredibly durable. - Sturdy metal fittings and quick releases for a lifetime of duty in the field or at home. - Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. - Working load range of 10-35lbs (4.5-16kg) accommodates service on road, cyclocross, and XC mountain bikes. Maximum capacity 75lbs (34kg). - Portable and compact construction creates a remarkably small folded footprint of 5" x 8" x 45" (13 x 20 x 115cm). - Available travel bag is water-resistant, durable, and padded to protect your stand and your other equipment. - Quick-release fittings make setup and storage fast and convenient. - At 12.6 lbs (5.7kg), traveling with this repair stand is easy. - A full ensemble of repair parts is available for long-term serviceability. - 3-Year Warranty.

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

The Burley Bee, our original bike trailer, is a long-standing family favorite for biking with children. With UV-protected windows, front and rear reflectors, and a 5-point harness system, the Bee takes both safety and comfort seriously.

It’s a race day, a gran fondo, or maybe just a ride day – either way, there’s bikes everywhere and there’s a need for mass bike storage. And because you love bicycles, you want to protect them and you need a simple, non-permanent and effective bike parking solution. The A Frame is a versatile bike storage idea for hanging up to 8 bikes, and as the industry standard you’ll see the A Frame at practically every type of cycling event. Making contact with only the bottom of your seat, the A Frame is the best bike parking solution for expensive road, cyclocross, mountain bikes, electric bikes and even kids bikes. And when the day is done it folds up and stores easily in a compact tote. - Ideal bicycle storage space for bike races, gran fondos, triathlons, demo events and community cycling events - Versatile design allows for bike parking without risk of scratching bikes or damaging components - System fits most any road bike, cyclocross bike, mountain bike, fitness bike, electric bike, or kids bikes - Innovative design easily folds to a compact unit when not in use - Tool-free design makes setup and breakdown quick - Anodized 6000-series aluminum body is lightweight, corrosion resistant and incredibly durable - Provides an awesome bike parking solution for up to 200lbs (90kg) of bikes - Total width safely accommodates up to 8 bikes (not to exceed 200lbs / 90kg) - Wide support base and rubber coated feet provide stability on any surface - Included travel tote is water-resistant, durable and padded to protect your stand and your other equipment - At 17.6lbs (8kg) taking this versatile bike storage system along is never in doubt - Custom branded side panels available - 1-Year Warranty

Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.

Load up the kids and hit the road with the Family Pack Kit. - Includes safari bar, seat pads, back rest, foot guards, and installation hardware - Safari bar offers children a secure handhold while allowing room to look around - Full coverage foot guards help keep tiny feet and fingers out of the rear wheel - Fully compatible with Fetch+ 2 Rear Pannier Kit - Carries two passengers up to 36kg (79 lbs.) each - We know what you're thinking: the kit is not to be used with one 72kg (158 lbs.) passenger

Designed for bike touring, the Burley Nomad bike trailer provides superior handling, stability, and 100- pound carrying capacity for the long road ahead.